Lens finder

Hints:
Write at least 2 characters
Try to narrow the search by typing the following: e.g. 70 300 is
If you find the content of this site useful, please purchase your lenses and accessories from our partners through this site. Thank you for your support!

Canon TS-E 24mm f/3.5L II

Canon TS-E 24mm f/3.5L II lens
Canon TS-E 24mm f/3.5L II lens
 

Full frame sized image

Lenses that create APS-C sized image are designed for digital only. They cannot be used on cameras that have image sensor larger than the APS-C format. These lenses are not suitable for film cameras either.

 

No Ultrasonic AF

Lenses with ultrasonic focusing mechanism tend to be quiter and faster than traditionally focusing lenses.

 

No stepping motor AF

Lenses with stepping motor focusing mechanism are better for contrast based focusing, and are quiter and faster than traditionally focusing lenses.

 

No Low Dispersion lens element is used

Low Dispersion lens elements help to reduce chromatic aberration.

 

Not stabilized

Image stabilization helps to reduce blur caused by hand shake, especially at high focal length or in low light situations. Image stabilization can give 1 to 3 stop advantage over none stabilized lens, based on the reciprocal rule.

 

Metal mount

Cheaper lenses are usually equipped with plastic mount, while more expensive, professional lenses have metal mount. In general, metal mounts are more durable, and a good thing to have when lenses are changed a lot. When a camera is used mainly with one lens, the material of the lens mount is not that important.

 

No Internal Zoom

Internally zooming lenses don't change their size while focal length is changing.

 

The front lens is fixed

The fixed front lens is not rotating during zoom and/or focusing. This allows the photographer to use petal shaped lens hood. Fixed front lenses also make the use of polarization filters a lot easier.

 

Weather Sealed

Weather sealed lenses are protected from dust and water. While they are not water proof, these lenses can be used in rain and other humid environments. Some sealings only provide protection against dust or water, not both. Sealing is only available when the lens is used on a similarly weather sealed camera body.

 

No drop-in filter support

Drop-in filters are used in those lenses where either the front lens is too large, or the field of view doesn't permit the use of traditional filters at the front of the lens. Usually bright tele and ultra-wide angle lenses support this filter type.

Canon TS-E 24mm f/3.5L II Specification

Available mount(s) Canon EF
Application(s) Landscape, Architecture, Special effects
Category(s) Tilt-shift
Multiplier
Stabilizer no
Focal length 24 mm (prime)
Lens construction 16 elements in 11 groups
Angle of view 35mm: 84°
digital: N/A
Number of blades 8
Maximum aperture f/3.5
Minimum aperture f/22
Minimum focusing distance 21 cm
Magnification 0.34×
Filter size 82 mm
Size ∅ 88.5 × 106.9 mm
Weight 780 g
Notes
AF speed N/A
AF sound
Internal focusing N/A
Internal zoom no
Fix front lens yes
Mount type metal
Weather sealed yes
Drop in filter no
Ultrasonic AF no
Stepping motor AF no
APS-C sized circle no
Low dispersion lens element no
Hard case N/A
Soft case LP1319
Lens hood EW-88B
Tripod adapter N/A
Canon TS-E 24mm f/3.5L II Specification

Canon TS-E 24mm f/3.5L II Reviews

Other reviews

Canon TS-E 24mm f/3.5L II in the news

Canon TS-E 24mm f/3.5L II Owner Reviews

There are no reviews to display

Canon TS-E 24mm f/3.5L II Sample Photos

Canon TS-E 24mm f/3.5L II Accessories

82 mm Filters

Copyright 2006 - 2024 © Pixinfo Ltd.